ATTACK SHARK SK03 Crystal Keycaps: Install & Style Guide
By Attack Shark | Premium Gaming Keyboards, Mice, Headsets ... | Published: 2026-10-26
Category: How-to Guides
Learn how to install ATTACK SHARK SK03 Crystal Keycaps on your mechanical keyboard and style them for a clean look.
Quick Answer
Install ATTACK SHARK SK03 Crystal Keycaps by removing your old keycaps, sorting the new ones by row, and pressing each keycap firmly onto the stem. The ASA profile and 136-key layout make them compatible with most mechanical keyboards.
Why the ASA Profile Matters
The SK03 keycaps use an ASA/CBSA profile with rounded sculpting and stepped rows. This means the keycaps are taller than OEM profile and have a distinct typing angle that supports both work and gaming. When installing, pay attention to the row heights: each row is shaped differently, so swapping keys between rows will feel uneven and may catch on adjacent keys.
Compatibility and Layout Flexibility
The 136-key set includes enough keycaps to cover 60%, 65%, 75%, 80%, TKL, 96%, 98%, 100%, 104-key, and 108-key keyboards. It supports both ANSI and ISO layouts, so you can use it on most mechanical keyboards regardless of regional layout. However, check your keyboard's bottom row: if it has non-standard sizes (like 1.5u modifiers or a 6u spacebar), you may need extra keycaps from another set.
Crystal Construction and Maintenance
The dual-layer construction—a clear PC shell over an ABS core—gives the keycaps a jelly-like look and a smooth feel. The clear top layer is prone to showing fingerprints and dust, so handle them with clean hands and wipe them regularly. Avoid using harsh chemicals; a soft, damp cloth works best.
Step-by-Step Installation
- Gather tools and prepare your keyboard: You'll need a keycap puller (wire puller preferred) and a clean, flat surface. Unplug your keyboard to avoid accidental inputs. If your keyboard is hot-swappable, you can remove switches later if needed, but for keycap installation, keep them in place. Check that you have a wire puller—plastic ring pullers can scratch the crystal surface.
- Remove the old keycaps: Use the puller to gently lift each keycap straight up. Start from a corner key and work your way across. Avoid twisting or prying, as that can bend the switch stems. If a keycap feels stuck, wiggle it slightly while pulling. If a keycap doesn't come off easily, don't force it—check for debris or a stabilizer issue.
- Sort the new keycaps by row: The SK03 set includes keycaps for different rows. Look at the side profile: the taller keys belong to the top rows (F-row, number row), while the shorter ones are for the bottom rows. Group them by row height to avoid mixing them up. Take a photo of your current keyboard layout before removing all keycaps—it helps when reinstalling.
- Install the keycaps row by row: Start with the bottom row (spacebar, modifiers) and work upward. Align the keycap's cross-shaped stem with the switch stem and press down firmly until it clicks. For larger keys like the spacebar, press on both sides to ensure the stabilizers engage. For the spacebar, press evenly on both ends—if one side pops up, the stabilizer isn't seated.
- Check for evenness and test all keys: After installing all keycaps, run your fingers across the surface to feel for any uneven heights. Press each key to ensure it registers and doesn't stick. If a key feels wobbly, reseat it by pulling and pressing again. Test all keys, especially the spacebar and enter key, to confirm stabilizers are working.
- Style and maintain your keycaps: The crystal tops look best with RGB lighting underneath. Clean them with a dry microfiber cloth to remove fingerprints. Avoid using alcohol or abrasive cleaners, as they can cloud the clear PC layer. Keep a microfiber cloth at your desk for quick smudge removal.
Product Facts
- ATTACK SHARK SK03 136 Keys Crystal Keycaps, ASA Profile, ANSI/ISO: Crystal dual-layer construction: a clear PC shell over an ABS core creates a substantial jelly-like look and a smooth, comfortable feel. The smooth surface feels nice for long typing sessions, but it shows smudges easily, so keep a microfiber cloth nearby.
ATTACK SHARK SK03 136 Keys Crystal Keycaps, ASA Profile, ANSI/ISO - ATTACK SHARK SK03 136 Keys Crystal Keycaps, ASA Profile, ANSI/ISO: ASA/CBSA profile: rounded sculpting fits the fingertips, while stepped rows provide a distinctive typing angle for work and gaming. The stepped rows mean you must install keycaps in the correct row order, or the angle will feel off and may cause typos.
- ATTACK SHARK SK03 136 Keys Crystal Keycaps, ASA Profile, ANSI/ISO: 136-key flexible layout support: fits 60%, 65%, 75%, 80%, TKL, 96%, 98%, 100%, 104-key, and 108-key mechanical keyboards. This set is versatile, but you still need to verify your keyboard's bottom row sizes before ordering.
