ATTACK SHARK SK05 MOA Keycaps: Setup & Use Guide
By Attack Shark | Premium Gaming Keyboards, Mice, Headsets ... | Published: 2026-10-28
Category: How-to Guides
Learn how to install and use the ATTACK SHARK SK05 PBT keycap set with its uniform MOA profile. This guide covers compatibility, installation steps, and what to expect from the 118/119-key ANSI layout.
Quick answer
The ATTACK SHARK SK05 PBT keycap set uses a uniform MOA profile, meaning every keycap has the same height and shape. This guide walks you through installing them on a standard ANSI mechanical keyboard and explains what that uniform feel means for your typing.
Why uniform MOA profile matters
Unlike traditional sculpted profiles (like OEM or Cherry) where rows have different heights and angles, MOA keycaps are all identical. This creates a flatter, more consistent surface that some typists prefer for a uniform feel across all keys. It can reduce finger travel distance and may feel more natural for users who type with a flat hand position.
The trade-off is that you lose the ergonomic scoop found in sculpted sets. If you rely on the curved row contours to guide your fingers, MOA might feel disorienting at first. The SK05's 9.8 mm height is also slightly taller than standard OEM keycaps, so your keyboard will feel a bit higher.
Compatibility: what to check before buying
The ATTACK SHARK SK05 set includes 118 or 119 keycaps designed for ANSI layout keyboards. This covers most standard 60%, 65%, 75%, TKL, and full-size boards with a standard bottom row (6.25u spacebar, 1.25u modifiers). It does not include keys for uncommon layouts like 40% or split keyboards.
Because the profile is uniform, you don't need to worry about row placement. Any keycap can go on any switch, as long as the stem is compatible (MX-style). The set uses a standard cross-shaped stem, so it fits Cherry MX and most clones.
A common mistake: assuming the set will fit ISO or non-standard bottom rows. Verify your keyboard uses ANSI layout and a standard bottom row before purchasing.
How to install ATTACK SHARK SK05 MOA keycaps
- Remove existing keycaps: Use a wire keycap puller to gently wiggle and lift each keycap straight up. Start from the corners and work inward. Common mistake: pulling at an angle can bend switch stems. Always pull straight up.
- Organize the new keycaps: Lay out the SK05 keycaps by size and row. Since MOA profile is uniform, row placement doesn't matter, but you still need to match the correct key width (e.g., 1u, 2u, 6.25u spacebar). Check that your spacebar is 6.25u (standard) or 7u (some aftermarket boards). The SK05 includes a 6.25u spacebar by default.
- Press each keycap onto the switch: Align the keycap's cross-shaped stem with the switch stem and press down firmly until you hear a click. Ensure the keycap sits flat and level. If a keycap feels crooked, remove it and re-seat it. Forcing it can damage the switch or keycap.
- Test all keys after installation: Press each key to confirm it registers and doesn't stick. Check that modifier keys (Shift, Ctrl, Alt) and the spacebar function correctly. A stuck or unresponsive key usually means the keycap is not fully seated or the switch stem is damaged. Re-seat or replace the switch.
What you get with the ATTACK SHARK SK05
- ATTACK SHARK SK05 118/119 Keys PBT Keycaps, MOA, ANSI: Uniform MOA profile with a consistent 9.8 mm height across all keys. This creates a flat, even typing surface with no row sculpting, which may feel more consistent for fast typists or gamers who prefer a uniform key feel.
ATTACK SHARK SK05 118/119 Keys PBT Keycaps, MOA, ANSI - ATTACK SHARK SK05 118/119 Keys PBT Keycaps, MOA, ANSI: Durable PBT material with a cute cat dye-sub design that resists wear and shine. PBT plastic is harder than ABS, so these keycaps will keep their texture and color longer without developing a glossy shine from frequent use.
