C07 Aviator Cable Setup for 8KHz Magnetic Keyboards
By Attack Shark | Premium Gaming Keyboards, Mice, Headsets ... | Published: 2026-10-23
Category: How-to Guides
Learn how to set up your ATTACK SHARK C07 Custom Aviator Cable for an 8KHz magnetic keyboard, including connection steps, common mistakes, and pro tips.
Quick answer
Connect the USB-C end to your 8KHz magnetic keyboard, the USB-A end to your PC, and secure the aviator connector by aligning the notches and twisting gently until it locks.
Why the C07 cable works with 8KHz keyboards
The ATTACK SHARK C07 Custom Aviator Cable is designed to handle the high data throughput of 8KHz polling rate magnetic switch keyboards. Its USB-C to USB-A connectivity ensures fast charging and high-speed data sync, which is critical for competitive gaming where every millisecond counts.
A common misconception is that any USB-C cable will work for 8KHz keyboards. In reality, lower-quality cables can introduce latency or fail to maintain the polling rate. The C07 cable's construction minimizes signal degradation, making it a reliable choice for enthusiasts.
Setup steps for the C07 Aviator Cable
- Connect the USB-C end to your keyboard: Plug the USB-C connector firmly into the port on your 8KHz magnetic keyboard. Ensure it is fully seated to avoid intermittent connections. A loose connection can cause the keyboard to drop to a lower polling rate or stop responding.
- Attach the aviator connector: Align the notches on the aviator plug and socket, then push together and twist gently clockwise until it clicks into place. Do not force it if it doesn't align. Forcing the connector can damage the pins. If it doesn't click easily, check alignment and try again.
- Connect the USB-A end to your PC: Insert the USB-A plug into a USB 3.0 or higher port on your computer. Avoid USB hubs that may not provide enough power or bandwidth. Using a USB 2.0 port may limit data transfer speed and affect 8KHz performance.
- Test the connection: Power on your keyboard and check that it is detected by your system. Open your keyboard software (if available) to verify the polling rate is set to 8KHz. If the keyboard isn't recognized, try a different USB port or re-seat the aviator connector.
Product facts
- ATTACK SHARK C07 Custom Aviator Cable for 8KHz Magnetic Keyboard: Designed for Gamers & Enthusiasts; engineered to support 8K polling rate magnetic switch keyboards. This means the cable can handle the high-speed data transfer needed for ultra-responsive gaming without introducing lag.
ATTACK SHARK C07 Custom Aviator Cable for 8KHz Magnetic Keyboard
