How to Apply Mouse Grip Tape for Better Aim

Quick Answer

To apply mouse grip tape for better aim, clean your mouse, align the tape carefully, and press from the center outward to avoid bubbles. Use a heat source for curved areas to ensure a snug fit.

Step-by-Step Application

1. Clean and Dry the Mouse Surface: Use a microfiber cloth and a small amount of isopropyl alcohol to wipe the mouse shell. Let it dry completely. This removes oils and dust that prevent the adhesive from bonding. A clean surface is the foundation for a long-lasting grip tape. Don't skip this step.
2. Peel and Align the Tape: Peel off a small section of the backing paper, align the tape with the mouse's contour, and press it down gently as you go. Start from the front or back and work toward the opposite end to avoid trapping air. If you misalign, peel back and reposition immediately before the adhesive sets.
3. Press from Center to Edges: Use your thumb or a soft card to press the tape from the center of the mouse outward. This pushes air bubbles to the edges. For curved areas, apply gentle heat with a hairdryer on low to soften the tape and help it conform. Bubbles reduce grip and look bad. Take your time to smooth them out.
4. Trim Excess if Needed: If the tape overhangs the mouse edges, use a sharp craft knife or scissors to trim it. Cut along the contour of the mouse for a clean finish. Trimming with a steady hand prevents frayed edges that can peel over time.
5. Allow Adhesive to Set: After application, wait at least 30 minutes before using the mouse. This lets the adhesive bond fully. Avoid excessive handling during this period. Patience here prevents the tape from shifting during your first gaming session.

Recommended Grip Tapes

• ATTACK SHARK X6 Grip Tape: The X6 Grip Tape features a matte skin-like surface with a textured finish for excellent water and sweat absorption. This keeps your hand dry and prevents slipping, which helps maintain steady aim during long gaming sessions.

  

• ATTACK SHARK X3/X3pro Grip Tape: The X3/X3pro Grip Tape is designed specifically for the X3 and X3pro mice, offering a precise fit. A precise fit means no loose edges or bunching, so the tape stays in place and provides consistent grip where you need it.