How to Install and Use an Attack Shark Coiled Cable
By Attack Shark | Premium Gaming Keyboards, Mice, Headsets ... | Published: 2026-10-24
Category: How-to Guides
Learn how to install and use an Attack Shark coiled cable with the C03 model and RC01 winder rod. Step-by-step guide for a clean, tangle-free gaming setup.
Quick answer
Connect the C03 coiled cable to your keyboard and PC, then use the RC01 winder rod to maintain its shape and prevent tangles.
Why Use a Coiled Cable and Winder Rod?
A coiled USB C cable like the Attack Shark C03 keeps your desk tidy and reduces clutter compared to a straight cable. The RC01 custom winder rod is an aluminum accessory that helps the coil keep its shape over time, preventing deformation that can happen with frequent use.
Step-by-Step Installation Guide
- 1. Unpack and Inspect: Remove the C03 coiled cable and RC01 winder rod from the packaging. Check that the aviator connector is securely attached and the USB C end is clean. Do not force the aviator connector apart; it is designed to stay connected during normal use.
- 2. Attach the Winder Rod: Unscrew the cap of the RC01 winder rod, slide it onto the coiled section of the cable, then screw the cap back on. The rod should sit snugly in the middle of the coil. If the rod feels loose, tighten the cap gently with your fingers—do not overtighten.
- 3. Connect to Keyboard: Plug the USB C end of the C03 cable into your keyboard. Ensure the connection is firm and the cable is oriented so the coil hangs naturally without twisting. A loose USB C connection can cause intermittent disconnects; push until you feel a click.
- 4. Connect to PC: Plug the USB A end (or the aviator side if using a detachable setup) into your computer. Route the cable so the coil rests on your desk without being stretched tight. Stretching the coil too far can permanently deform it; keep the cable length relaxed.
- 5. Adjust and Tidy: Gently rotate the winder rod to align the coil loops evenly. Use the rod as a handle to reposition the cable without touching the coil itself. Avoid pulling the cable by the coil; always grip the winder rod or the straight ends.
What You Need
- ATTACK SHARK C03 COILED CABLE: 24K Gold Plated Aviator Connectors for superior resistance to oxidation and interference. This ensures a stable connection even after repeated plugging and unplugging, which is common when swapping keyboards or cables.

ATTACK SHARK C03 COILED CABLE - ATTACK SHARK RC01 Custom Winder Rod for Coiled USB C Cable: Customized aluminum coil winder with detachable screw cap design for easy coil installation. The winder rod keeps the coil neat and extends its lifespan by preventing permanent deformation.

ATTACK SHARK RC01 Custom Winder Rod for Coiled USB C Cable

