Why PBT keycaps need a routine, not a rescue
PBT keycaps are a long-game upgrade. The ATTACK SHARK PBT Keycaps Full Keycap Set uses double-shot PBT construction, which the catalog describes as more wear-resistant than common ABS and resistant to oil and fading over long-term use. That does not make them maintenance-free. Most visible problems — a greasy sheen on the home row, grit between caps, faded legends — start small and are easier to prevent than to reverse.
The routine below is built around what the supplied product information actually supports: the material, the Cherry profile, and the cleaning-friendly surface. Where a step depends on details the catalog does not confirm, this guide says so rather than guessing.
What the ATTACK SHARK set gives you to work with
- ATTACK SHARK PBT Keycaps Full Keycap Set: Double-shot PBT construction with wear and oil resistance, described as stronger than common ABS. The material is the reason a light, regular clean is usually enough; you are protecting a surface that is already built to resist daily finger oils.

ATTACK SHARK PBT Keycaps Full Keycap Set - ATTACK SHARK PBT Keycaps Full Keycap Set: Cherry profile with a matte texture and ergonomic contour. The matte finish is what makes shine visible first; keeping it clean helps you notice real wear instead of mistaking built-up oil for worn plastic.
- ATTACK SHARK PBT Keycaps Full Keycap Set: Legends are double-shot molded and described as not fading with long-term use. Fading legends are one of the wear signs people watch for; on this set, the more likely culprit for dull-looking keys is surface residue, not the legend itself.
A simple cleaning routine for PBT keycaps
Do this monthly, or sooner if the keys feel slick. The catalog confirms the keycaps are easy to clean but does not specify water temperature, soak time, or cleaning agents, so keep each step gentle and stop if anything looks or feels wrong.
- 1. Remove the keycaps you want to clean: Pull individual caps with a keycap puller. You do not need to strip the whole board every time; start with the keys your fingers touch most.
- 2. Wipe the loose grit first: A dry, soft cloth removes dust and crumbs before they turn into a paste. This is the step most people skip.
- 3. Wash with mild soap and lukewarm water: Use a small amount of mild dish soap and lukewarm water, agitate gently, and rinse. The supplied information does not specify a soak duration or water temperature, so keep exposure short and avoid harsh solvents.
- 4. Dry completely before refitting: Shake off excess water and let the caps air-dry fully on a towel. Refitting damp caps traps moisture against the switch housing.
- 5. Clean the keyboard surface while the caps are off: Use a soft brush or compressed air around the switch stems. The keycap set documentation does not cover switch cleaning, so follow your keyboard's own guidance for that part.
Habits that slow shine on the home row
Shine on PBT is usually a mix of finger oil and polished texture. You cannot stop your fingers from touching the keys, but you can reduce how much oil and grit they deposit.
- Wash your hands before long sessions: The catalog specifically notes oil resistance, which helps, but clean hands mean less oil to resist in the first place.
- Keep food and drinks away from the board: Sugary or greasy residue is harder to lift later and can attract grit into the gaps between caps.
- Rotate your most-used keys: If your set includes spare caps for your layout, swapping the most-worn keys with less-used ones spreads wear. The supplied information confirms a 144-key set with layout coverage for 61/68/84/87/98/100/104-key boards, but does not confirm which specific spare sizes are included, so check your set before relying on this.
- Store spare caps away from sunlight and heat: The catalog does not specify UV or heat limits for this set; keeping spares in a drawer is a sensible default rather than a manufacturer instruction.
PBT vs ABS wear: what to expect over time
The catalog makes one direct comparison: the double-shot PBT material is described as stronger than common ABS. That is a material claim, not a guarantee about how any individual set will age.
- PBT (this set): Described as wear-resistant, oil-resistant, and fade-resistant, with double-shot legends. Expect it to hold texture and legibility longer under daily use, but it is not indestructible.
- Common ABS: The catalog positions ABS as the weaker comparison point. ABS keycaps are widely associated with faster shine, though the supplied information does not give a timeline or test result.
- What neither material changes: Finger oil, grit, and heavy use still affect both. Cleaning and hand hygiene matter regardless of material.
Wear signs to check for, and what they mean
Check your keys every few months under a bright light. The goal is to tell surface residue apart from actual material wear.
- A uniform sheen on the most-used keys: Usually oil and polished texture. Clean first; if the sheen remains after drying, it is likely surface wear.
- Legends that look dull or rubbed: On double-shot PBT the legend is molded into the cap, and the catalog states it will not fade with long-term use. If a legend looks worn, check for residue or damage before assuming fade.
- Shiny patches with visible texture loss: This is the clearest sign of real wear. No cleaning will restore texture; at that point, replacing the affected caps is the practical fix.
- Sticky or tacky feel: Usually residue rather than wear. Clean and dry thoroughly before drawing conclusions.
Compatibility and handling notes before you swap caps
The ATTACK SHARK set is described as compatible with MX-structure switches such as Cherry, Gateron, and Akko, and as suitable for 61/68/84/87/98/100/104-key layouts. Those are the confirmed boundaries. The supplied information does not confirm compatibility with optical, Topre, or other non-MX switch types, so check your keyboard before buying or swapping.
The catalog also notes that the keyboard pictured is for display only and that only the keycaps are sold. If you are buying this set to refresh an existing board, that is the relevant detail: you are getting caps, not a keyboard. Handle the caps by the edges when installing, seat them evenly, and avoid forcing a cap onto a stem — a bent stem or cracked cap is a handling problem, not a wear problem.


