Why the M71’s Materials Change Your Care Routine
The ATTACK SHARK x XINMENG M71 Knob CNC Aluminum Wireless Mechanical Keyboard is built differently from a typical plastic keyboard. Its CNC-machined aluminum alloy body undergoes an anodic oxidation process, giving it a durable, corrosion-resistant finish that holds its color. At about 1.3KG, it stays planted on your desk, but that solid metal construction means you should avoid harsh cleaners that could dull the finish. The PBT keycaps are double-shot, so the legends won’t fade, and they resist shine better than ABS. These materials reward simple, consistent care rather than aggressive scrubbing.
M71 materials that guide your cleaning choices
- ATTACK SHARK x XINMENG M71 Knob CNC Aluminum Wireless Mechanical Keyboard: CNC Aluminium Alloy Machined Body with anodic oxidation process, weighing about 1.3KG. The anodized finish is durable but can be damaged by abrasive cleaners; use gentle methods to preserve the color and corrosion resistance.

ATTACK SHARK x XINMENG M71 Knob CNC Aluminum Wireless Mechanical Keyboard - ATTACK SHARK x XINMENG M71 Knob CNC Aluminum Wireless Mechanical Keyboard: 71-key layout with 132 original double-colour injection PBT keycaps (71 original keycaps & complimentary 61 additional keys). PBT keycaps are more resistant to wear and shine than ABS, so you can clean them without worrying about legends fading quickly.
- ATTACK SHARK x XINMENG M71 Knob CNC Aluminum Wireless Mechanical Keyboard: 4600mAh battery with low-power wireless mode lasting up to about 15 days. Battery care affects wireless uptime; understanding charging habits helps you avoid frequent recharges.
A safe cleaning routine for the aluminum body and knob
Dust and fingerprints are the main enemies of the M71’s finish. Follow these steps to keep the metal looking its best without risking damage.
- Power down and disconnect: Turn off the keyboard and unplug any cable. If you’re using wireless mode, switch it off to avoid accidental key presses while cleaning.
- Dust the surface: Use a soft, dry microfiber cloth or a brush to remove loose dust from the aluminum body and around the knob. Avoid compressed air directly on the knob, as it can force debris inside.
- Wipe the aluminum: Dampen a microfiber cloth with water only—no alcohol or abrasive cleaners—and gently wipe the metal. The anodic oxidation layer is tough, but harsh chemicals can degrade it over time.
- Clean around the knob: The knob is a control point, so grit can interfere with smooth rotation. Use a dry brush or a cotton swab to dislodge dust from the gap between the knob and the case. Do not attempt to remove the knob unless the manufacturer explicitly supports it; the supplied information does not confirm that the knob is user-removable.
- Dry completely: Buff the surface with a dry cloth and let any remaining moisture evaporate before reconnecting power.
Keycap cleaning without harming the PBT
The M71’s PBT keycaps are double-shot, meaning the legends are molded into the plastic and won’t rub off. That makes them safe to clean with a slightly damp cloth. For deeper cleaning, you can remove keycaps if you have a keycap puller, but the supplied information does not confirm that a puller is included, so check your package. If you do remove them, use a mild soap and water solution, rinse thoroughly, and dry completely before reinstalling. Avoid soaking the keyboard itself—only the keycaps should be washed. Since the keyboard is hot-swappable, you could also remove switches for cleaning, but that requires a switch puller and is not necessary for routine maintenance.
Battery care for the 4600mAh wireless mode
The M71’s large 4600mAh battery provides up to about 15 days of use in low-power wireless mode. To keep it healthy, avoid letting it drain completely; recharge when you see the low-battery indicator. The supplied information does not specify charging time or whether the battery is replaceable, so refer to the user manual for those details. If you primarily use wired mode, you can leave it plugged in, but if you switch between modes, remember that Bluetooth 5.0 and 2.4GHz may consume power differently. There’s no need to baby the battery—just charge it regularly and store the keyboard in a cool, dry place when not in use.
What to avoid when cleaning the M71
Some common cleaning habits can harm the M71’s specific materials. Here’s what not to do.
- Avoid alcohol and ammonia-based cleaners: These can strip the anodic oxidation layer on the aluminum, dulling the finish and reducing its corrosion resistance.
- Skip abrasive sponges or scrubbing pads: Even fine abrasives can scratch the anodized surface. Stick to microfiber cloths.
- Don’t submerge the keyboard: The M71 is a wireless mechanical keyboard with a battery; liquids can damage electronics. Clean with a damp cloth only.
- Don’t force the knob: If the knob feels gritty, use air or a brush to clean around it. Forcing it could cause damage. The supplied information does not confirm that the knob is removable or serviceable by the user.
When to check for wear
The M71 is built to last, but regular inspection helps you catch issues early. Every few months, look at the aluminum body for scratches or dull spots—these can indicate that your cleaning method is too harsh. Check the PBT keycaps for shine; while PBT resists shine, heavy use can still wear the texture over time. The knob should rotate smoothly; if it becomes stiff, clean around it as described. The supplied information does not specify a maintenance schedule, so use your judgment based on how often you use the keyboard. If you notice any performance issues, such as dropped connections in wireless mode, try recharging the battery first.


