Attack Shark X87 Tri-mode Keyboard Setup Guide

Quick answer

Set up your Attack Shark X87 by choosing your connection mode, pairing with your device, and verifying the connection. This guide walks you through each step.

Step-by-step setup

1. 1. Unbox and charge: Remove the keyboard and charging cable. Connect the cable to a USB power source and let it charge for at least 2 hours before first use. The LED indicator will turn solid when fully charged. A common mistake is skipping the initial charge, which can cause the keyboard to disconnect mid-use.
2. 2. Choose your mode and pair: For Bluetooth: press FN+1 to enter pairing mode, then select 'Attack Shark X87' on your device. For 2.4G: plug the included receiver into a USB-A port, then press FN+2. For wired: connect the cable directly to your device's USB port. If the keyboard doesn't appear in your Bluetooth list, hold FN+1 for 5 seconds to force re-pairing.
3. 3. Verify the connection: Open a text editor or game and type a few characters. Check that all keys respond without delay. If you notice lag or missed keystrokes, switch to wired mode or move the 2.4G receiver closer to the keyboard. For the lowest latency in gaming, always prefer wired or 2.4G mode over Bluetooth.

Product facts

• ATTACK SHARK X87 Tri-mode Gasket Mechanical Keyboard: Tri-Mode Wireless Connectivity & Multi-Device Compatibility: supports Bluetooth, 2.4G wireless, and wired connections, switchable via FN+1/2/3/4 or side button. You can pair the keyboard with tablets, laptops, PCs, and smartphones without needing separate peripherals for each device.