Choose your connection mode first
The ATTACK SHARK V5 is a tri-mode mouse: wired USB-C, 2.4GHz wireless, and Bluetooth. Before you touch the C06 Ultra Cable or start pairing, decide which mode you need for the session. Wired USB-C is the most direct path when you want to charge and play at the same time. 2.4GHz is the mode that supports the V5’s true 8000Hz polling rate in wireless use. Bluetooth is the most convenient for everyday tasks where you don’t need that polling rate.
You switch modes with the button on the back of the mouse. The supplied information does not describe a specific button sequence or LED confirmation pattern, so treat the mode button as the starting point and check that the mouse responds before moving on.
V5 specs that affect setup
- ATTACK SHARK V5 8KHz Wireless PAW3950MAX Gaming Mouse with C06 Ultra Cable: Tri-mode connectivity: wired USB-C, 2.4GHz, and Bluetooth, switched via the button on the back of the mouse. This is the foundation for every setup path below; you cannot configure polling or pairing until you know which mode the mouse is in.

ATTACK SHARK V5 8KHz Wireless PAW3950MAX Gaming Mouse with C06 Ultra Cable - ATTACK SHARK V5 8KHz Wireless PAW3950MAX Gaming Mouse with C06 Ultra Cable: In wireless mode, the V5 reaches a true 8000Hz polling rate. 8KHz is a wireless-mode feature, so your cable and receiver choices should support that goal rather than work against it.
- ATTACK SHARK V5 8KHz Wireless PAW3950MAX Gaming Mouse with C06 Ultra Cable: The V5 measures 121x64.5x38mm and is tailored for medium-large hands. Confirm the mouse fits your grip before you spend time routing cables and pairing; a poor fit will overshadow any polling-rate benefit.
Connect the C06 Ultra Cable for wired use
The C06 Ultra Cable is the wired USB-C option in the V5 bundle. Use it when you want a direct connection or need to charge the mouse. The supplied information does not include a separate C06 installation manual, so follow the V5’s USB-C port and your own equipment’s guidance rather than any assumed procedure.
- Check the mouse end: The V5 uses a USB-C connection for wired mode. Confirm the cable’s USB-C connector seats fully in the mouse port without forcing it.
- Route the cable with slack: Leave enough slack for full arm movement during play. A tight cable can tug the mouse mid-swipe and undermine the stable control the V5’s asymmetrical waist is designed to support.
- Connect the other end to your PC: Plug the cable into an available USB port on your computer. The supplied information does not specify a required USB version or power output, so use a standard port and check that the mouse responds.
- Confirm wired mode: After connecting, move the mouse and check that the cursor responds. If it does not, switch the mode button on the back of the mouse to the wired position and try again.
Pair 2.4GHz for 8KHz wireless play
2.4GHz is the mode that supports the V5’s true 8000Hz polling rate. The supplied information does not describe a pairing button sequence, a receiver-pairing tool, or an LED confirmation pattern. What it does confirm is that the V5 uses a Nordic 52840 chip for low latency and low power consumption, and that the mode button on the back of the mouse switches between connection modes.
Start by switching the mouse to 2.4GHz mode using the back button. If a receiver is supplied with your V5, connect it to a USB port before switching modes. The supplied information does not confirm whether a receiver is included in every variant, so check your package contents. If the mouse does not respond in 2.4GHz mode, switch back to wired mode, confirm the mouse works, then try 2.4GHz again. The supplied information does not include a troubleshooting sequence beyond mode switching, so avoid inventing steps like holding buttons for a set number of seconds.
Pair Bluetooth when you don’t need 8KHz
Bluetooth mode is the third option and is useful for laptops or tablets where you want to free up a USB port. The supplied information does not describe the Bluetooth pairing procedure, pairing button combination, or how many devices the V5 can remember. To pair, switch the mouse to Bluetooth mode with the back button, then use your computer’s or device’s Bluetooth settings to search for and connect to the mouse. If the V5 does not appear, confirm the mouse is in Bluetooth mode and that your device’s Bluetooth is on. The supplied information does not confirm a specific device name or pairing timeout, so rely on your device’s normal Bluetooth discovery process.
Cable management for a wireless-first desk
When you play wirelessly, the C06 Ultra Cable is mainly a charging cable. Keep it routed so it does not interfere with mouse movement or put strain on the USB-C port.
- Use a fixed charging spot: Route the C06 cable to a consistent spot at the edge of your desk. Charging the V5’s 500mAh battery there keeps the cable out of your play area.
- Avoid tight bends at the connector: The supplied information does not give a minimum bend radius for the C06 Ultra Cable. As a practical habit, leave a gentle loop near the mouse end rather than a sharp fold.
- Keep the cable clear of the mouse path: The V5 is a 53g (±3g) mouse with dual-layer PTFE feet. A cable lying across your mousepad can catch the edge of the mouse and disrupt the glide those feet are meant to provide.
Set polling rate and DPI in the driver
The V5 has dual drivers: a Web Driver and the ATTACK SHARK self-developed driver. Both offer DPI adjustment, rate of return (polling rate), competitive mode, customized buttons, macro recording, and personalized key mapping. To use the 8KHz wireless polling rate, open the driver and set the rate of return to 8000Hz while the mouse is in 2.4GHz wireless mode. The supplied information does not specify whether 8KHz is available in Bluetooth or wired mode, so confirm the setting in the driver for your chosen mode.
The PAW3950MAX sensor supports up to 42000 DPI, 750 IPS speed, and 60G acceleration. Higher DPI is not automatically better; choose a DPI that lets you track targets comfortably, then adjust in-game sensitivity. The driver is also where you can set competitive mode and remap buttons, but the supplied information does not detail what competitive mode changes, so test it in a practice session before relying on it in a match.
Checkpoints before you play
- Mode matches your goal: Confirm the back button is set to 2.4GHz for 8KHz wireless play, wired USB-C for charging or direct connection, or Bluetooth for convenience.
- Driver shows 8000Hz: Open the ATTACK SHARK driver and check that the rate of return is set to 8000Hz. If the option is unavailable, confirm you are in 2.4GHz wireless mode.
- Cable is charging, not dragging: If the C06 Ultra Cable is connected for charging, make sure it has enough slack that it does not pull on the mouse during movement.
- Grip feels stable: The V5’s asymmetrical waist gives your thumb, ring, and pinky fingers a resting point. Take a few practice swipes and lifts to confirm the shape suits your hand before committing to a long session.


