Pick the connection mode that matches your session
The ATTACK SHARK X3 PRO is a tri-mode mouse: you can connect over wired USB-C, 2.4GHz wireless, or Bluetooth. The mode button sits on the back of the mouse, so switching between them is a physical action rather than a software setting.
For competitive play where latency matters, wired USB-C or 2.4GHz wireless are the modes to consider. Bluetooth is the convenient option for everyday use or devices where a dongle is awkward. The supplied information does not list a recommended mode for specific games, so choose based on whether you prioritize a stable low-latency link or cable-free convenience.
X3 PRO connection and power facts
- ATTACK SHARK X3 PRO Three Modes 8K Gaming Mouse: BK3633 chip supports three connection modes: wired USB-C, 2.4GHz wireless, and Bluetooth. This is the core of the tri-mode setup: you have three distinct ways to connect, each suited to different situations.

ATTACK SHARK X3 PRO Three Modes 8K Gaming Mouse - ATTACK SHARK X3 PRO Three Modes 8K Gaming Mouse: The X3 PRO offers up to 200 hours of battery life on a single 2–3 hour charge. Wireless sessions are practical for long stretches, but you still need to plan charging time.
- ATTACK SHARK X3 PRO Three Modes 8K Gaming Mouse: An automatic smart sleep function conserves power. If the mouse goes quiet during a break, it may be sleeping rather than disconnected; a click or movement should wake it.
Wired USB-C setup
Wired mode is the most direct connection and the one to use when you want to charge while playing. The supplied information does not include a specific cable requirement beyond USB-C, so use a USB-C cable you trust.
- Connect the cable: Plug a USB-C cable into the mouse and the other end into your computer. The X3 PRO uses wired USB-C as one of its three modes.
- Confirm the mode: If the mouse does not respond, press the mode button on the back of the mouse to cycle to wired mode. The supplied information does not describe an on-screen indicator, so rely on cursor movement.
- Charge while you play: A full charge takes 2–3 hours according to the supplied information. Wired mode is a sensible time to top up the battery.
2.4GHz wireless setup with the dongle
2.4GHz wireless is the low-latency wireless mode. The supplied information mentions a dongle but does not detail a pairing button sequence beyond the mode button on the back of the mouse. If your unit includes a dongle, plug it in before switching modes.
- Insert the dongle: Plug the 2.4GHz dongle into a free USB port on your computer. The supplied information does not specify whether the dongle is stored inside the mouse, so check the packaging.
- Switch to 2.4GHz mode: Press the mode button on the back of the mouse until the 2.4GHz mode is active. The supplied information does not describe a light indicator for each mode, so test by moving the cursor.
- Check the battery: 2.4GHz wireless draws on the internal battery. With up to 200 hours of battery life, a full charge should last through many sessions, but charge before a marathon if the mouse has been idle for weeks.
Bluetooth pairing
Bluetooth mode is the most convenient for laptops and tablets, but the supplied information does not include the exact pairing steps (such as holding a button for a set time). The general flow below is typical, but treat it as a starting point rather than a manufacturer instruction.
- Switch to Bluetooth mode: Press the mode button on the back of the mouse to select Bluetooth. The supplied information confirms Bluetooth is one of the three modes but does not describe a pairing indicator.
- Put the mouse in pairing mode: The supplied information does not specify how to enter Bluetooth pairing mode. Check the quick-start guide included with your mouse for the exact button combination.
- Pair from your device: Open your device's Bluetooth settings, find the X3 PRO in the list, and connect. The supplied information lists Windows, macOS, and Android as supported operating systems.
Tune DPI and polling rate in the driver
The X3 PRO has a self-developed driver for customizing DPI, polling rate, and macro buttons. The PixArt 3395 sensor supports up to 26,000 DPI with six adjustable levels. The supplied information does not state the available polling rate steps or whether 8K polling is enabled by default, so open the driver to see the options for your unit.
Macro buttons can be programmed to trigger complex skill combinations with a single click, according to the supplied information. If you play games that allow macros, this is where you set them up. Keep in mind that some competitive games restrict macro use; check the rules for your title.
Sensor and customization evidence
- ATTACK SHARK X3 PRO Three Modes 8K Gaming Mouse: PixArt 3395 sensor with DPI up to 26,000 and six adjustable levels. You can set a DPI that matches your sensitivity preference across different games or productivity tasks.
- ATTACK SHARK X3 PRO Three Modes 8K Gaming Mouse: Self-developed driver software allows DPI, polling rate, and macro customization. The driver is where you finish setup after connecting; without it, you are limited to default settings.
Checkpoints before you play
After connecting and configuring, run through these checks. They are based on the supplied product information and general practice; the manufacturer may have additional recommendations.
- Confirm the active mode: Move the cursor and click. If nothing happens, press the mode button on the back of the mouse to cycle to the correct mode.
- Verify battery level: For wireless modes, ensure the mouse is charged. A full charge takes 2–3 hours and provides up to 200 hours of use.
- Open the driver: Check that the X3 PRO is detected and that your DPI and polling rate settings are applied. The supplied information does not list default values, so note what you change.
- Test the buttons: The KAILH GM8.0 micro switches are rated for over 80 million clicks. If a button feels unresponsive, check the driver for macro assignments that might override default behavior.


