Start with the connection that matches your play
The X68 PRO HE supports three connection modes: USB-C wired, 2.4GHz wireless, and Bluetooth. Your first decision is which one to use for the session, because the keyboard’s polling rate changes with the mode. Wired mode supports an 8000Hz polling rate, while wireless mode runs at 1000Hz. Both are fast, but the wired connection is the one to choose when you want the highest polling rate the keyboard offers.
The supplied coiled cable is your wired connection. It also charges the internal 5000mAh battery when you are not using wireless. If you plan to switch between modes often, leave the cable connected to the keyboard and route it so the coil does not pull on the USB-C port.
Wired setup with the coiled cable
Use this sequence the first time you connect the X68 PRO HE by cable.
- 1. Connect the coiled cable to the keyboard: Plug the USB-C end into the port on the X68 PRO HE. The supplied cable is a custom coiled keyboard cable designed for this keyboard.
- 2. Connect the other end to your computer: Use a USB port on your PC. The supplied information does not specify a required USB version or power output, so use a standard USB port and avoid unpowered hubs if the keyboard does not respond.
- 3. Confirm the keyboard is in wired mode: The X68 PRO HE switches modes via a side button or shortcut keys. If the keyboard does not respond, press the side button or use the shortcut to select USB-C wired mode. The supplied information lists FN+Q/W/E for Bluetooth and FN+R for 2.4GHz, but does not give a dedicated wired shortcut, so the side button is the safer way to cycle modes.
- 4. Check that the 8000Hz polling rate is active: The 8000Hz rate applies in wired mode. The supplied information does not describe a separate polling-rate switch on the keyboard, so confirm the setting in the QMK web driver if you want to verify or change it.
Why wired mode matters for the X68 PRO HE
- ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Keyboard With Coiled Cable: Equipped with a custom coiled keyboard cable, the X68 PRO HE supports an 8000Hz wired polling rate for ultra-fast input transmission. The coiled cable is not just for looks; it is the connection that unlocks the keyboard’s highest polling rate.

ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Keyboard With Coiled Cable - ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Keyboard With Coiled Cable: In wireless mode, it delivers a 1000Hz polling rate, paired with a 128KHz scan rate, reducing latency to an impressive 0.125ms. Wireless mode is still responsive, but the polling rate is lower than wired. Choose wireless for convenience, wired for the highest polling rate.
Pairing in 2.4GHz wireless mode
2.4GHz wireless gives you a low-latency connection without the cable. The supplied information does not describe the exact pairing sequence for the USB receiver, so these steps cover what is confirmed.
- 1. Connect the 2.4GHz receiver: Plug the USB receiver into a port on your computer. The supplied information does not specify whether a receiver is included, so check your package contents.
- 2. Switch the keyboard to 2.4GHz mode: Press the side button or use the shortcut FN+R to select 2.4GHz wireless mode.
- 3. Confirm the connection: Type on the keyboard. If it does not respond, try a different USB port or re-seat the receiver. The supplied information does not include a separate pairing button or software pairing step for 2.4GHz.
Pairing over Bluetooth
Bluetooth mode is useful for tablets, laptops, or a clean desk setup. The X68 PRO HE supports Bluetooth, and the supplied shortcuts are FN+Q, FN+W, and FN+E for Bluetooth profiles.
- 1. Select a Bluetooth profile: Press FN+Q, FN+W, or FN+E to choose one of the three Bluetooth slots. The keyboard should enter pairing mode; the supplied information does not describe a separate pairing button.
- 2. Put your device in Bluetooth pairing mode: Open your device’s Bluetooth settings and look for the X68 PRO HE. The exact device name is not confirmed in the supplied information.
- 3. Connect and test: Select the keyboard in your device’s Bluetooth list. If it does not appear, try another profile shortcut or move the keyboard closer to the device.
Connectivity and battery facts for wireless setup
- ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Keyboard With Coiled Cable: This hall effect keyboard with magnetic switches supports tri-mode connectivity—Bluetooth, 2.4GHz wireless, and USB-C wired—for ultimate flexibility. You can use the same keyboard across a gaming PC, laptop, or tablet without swapping cables.
- ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Keyboard With Coiled Cable: Powered by a robust 5000mAh battery, it’s perfect for gaming, work, and study without interruptions. The large battery supports wireless use, but the supplied information does not state expected battery life in hours, so plan to charge via the coiled cable when needed.
Tuning magnetic switches and rapid trigger
The X68 PRO HE uses Hall Effect amber magnetic switches with adjustable actuation from 0.1mm to 3.4mm and 0.01mm trigger accuracy. You can adjust actuation and enable features like DKS, MT, and TGL, but the supplied information does not describe the exact steps to change these settings. The QMK web driver is the customization tool mentioned for key functions, macros, and RGB effects. Use it to explore switch settings, and test changes in a safe environment before relying on them in a match.
The keyboard also supports hot-swapping between different north-pole-down magnetic switches. The supplied information confirms hot-swappable PCB compatibility with north-pole-down magnetic switches, but does not list specific third-party switch models that are supported. If you plan to swap switches, verify compatibility with the switch manufacturer before purchasing.
Switch and customization evidence
- ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Keyboard With Coiled Cable: The ATTACK SHARK X68 PRO HE gaming keyboard features Hall Effect amber magnetic switches with 0.01mm trigger accuracy and adjustable actuation from 0.1mm to 3.4mm. This is the core of the rapid trigger experience; you can fine-tune how far you press before a key registers.
- ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Keyboard With Coiled Cable: The QMK web driver offers easy customization without software downloads, allowing you to adjust key functions, macros, RGB effects, and more, while the hot-swappable PCB lets you switch between different north-pole-down magnetic switches for a fully personalized experience. You can customize the keyboard through a browser and change switches later, but the supplied information does not detail the exact driver workflow.
First-session checkpoints
- Confirm your active connection mode: The side button and shortcuts (FN+Q/W/E for Bluetooth, FN+R for 2.4GHz) switch modes. Make sure you are in the mode you intend to use.
- Test the coiled cable strain relief: The coiled cable can tug on the keyboard if routed tightly. Leave some slack near the USB-C port.
- Check battery level before wireless play: The 5000mAh battery needs charging via USB-C. The supplied information does not include a battery indicator description, so charge before long wireless sessions.
- Verify key settings in the QMK web driver: If you change actuation or enable DKS, MT, or TGL, test each key in the driver or a text editor to confirm the behavior.


