Pick the connection that fits the session
The ATTACK SHARK X98 gives you three ways to connect: low-latency 2.4GHz wireless, Bluetooth 5.0 for pairing with multiple devices, and a USB-C wired connection. Choose 2.4GHz when you want the keyboard to behave like a dedicated gaming peripheral, Bluetooth when you need to move between a laptop, tablet, or phone, and USB-C when you want a wired link and don't want to think about the battery.
The 4000mAh battery is rated for up to 200 hours of performance, so wireless use is realistic for most desk setups. The 102-key layout keeps a full number pad and arrow keys, which is why the X98 is a sensible fit if you use spreadsheets, accounting software, or shortcuts that depend on a numpad.
Pair the X98 over 2.4GHz wireless
- Connect the 2.4GHz receiver: Plug the 2.4GHz dongle into a free USB port on the computer you want to use. The supplied information describes 2.4GHz as the low-latency wireless option, so this is the mode to choose when response time matters.
- Power on the keyboard: Turn the X98 on and let it connect to the receiver. Keep the keyboard reasonably close to the computer during the first connection so the link can establish cleanly.
- Confirm the keyboard is recognized: Type in a text field to check that keystrokes register. If nothing appears, re-seat the dongle in a different USB port and power-cycle the keyboard before trying again.
Pair over Bluetooth 5.0 for multi-device use
- Open Bluetooth settings on your device: On a laptop, tablet, or phone, open the Bluetooth menu and start a new device scan. The X98 supports Bluetooth 5.0 for multi-device pairing.
- Put the keyboard into Bluetooth pairing mode: Use the X98's Bluetooth pairing control to make it discoverable. The supplied materials confirm Bluetooth 5.0 pairing is supported but do not list the exact key combination, so check the quick-start card or the driver software for the specific shortcut on your unit.
- Select the X98 from the device list: When the keyboard appears in your device's Bluetooth list, select it and confirm any pairing prompt. Repeat the process on each device you want to pair.
- Switch between paired devices: Once more than one device is paired, use the keyboard's device-switching control to move between them. The X98's multi-device Bluetooth support is the reason this is worth setting up rather than re-pairing each time.
Use USB-C wired mode when you want a fixed link
Connect the X98 with a USB-C cable when you want a reliable wired connection. Wired mode is also useful during long sessions where you would rather not manage battery level, and it gives you a stable link while you install and configure the driver.
The supplied information does not specify charging behavior or cable length, so treat the USB-C connection as a wired mode first and check the included accessories for the exact cable provided.
X98 features that affect setup and daily use
- ATTACK SHARK X98 Full-size Wireless Mechanical Keyboard: Tri-mode connectivity: low-latency 2.4GHz wireless, Bluetooth 5.0 for multi-device pairing, and USB-C wired. You can keep one keyboard for gaming, work, and mobile devices instead of swapping peripherals.

ATTACK SHARK X98 Full-size Wireless Mechanical Keyboard - ATTACK SHARK X98 Full-size Wireless Mechanical Keyboard: 4000mAh battery rated for up to 200 hours of performance. Wireless use is practical for extended sessions, though the supplied information does not confirm charge time or exact runtime per mode.
- ATTACK SHARK X98 Full-size Wireless Mechanical Keyboard: 102-key full-size layout with number pad and arrow keys. Numpad-heavy work stays efficient, and the layout is familiar if you are moving from a standard office keyboard.
- ATTACK SHARK X98 Full-size Wireless Mechanical Keyboard: Hot-swappable PCB supports both 3-pin and 5-pin switches, and the board ships with pre-lubricated linear switches. You can change switches later without soldering, and the stock linear feel is aimed at fast gaming response.
Install the driver to unlock lighting and personalization
The supplied operating instructions say to install the custom driver software to unlock advanced personalization, sync lighting with your music, and create a unique atmosphere. Install the driver after the keyboard is connected and recognized, then use it to adjust the 16 million colors and 20 preset lighting effects.
The X98 uses a gasket-mounted structure with five layers of sound-dampening foam and PBT keycaps. Those details affect feel and sound rather than pairing, so they are worth knowing but do not change the connection steps.
Checkpoints before you rely on the wireless link
- Confirm the active mode: Make sure the keyboard is set to the mode you intend to use. If you paired over Bluetooth but the keyboard is still in 2.4GHz mode, keystrokes may go to the wrong device.
- Test the numpad: Open a spreadsheet or text field and type numbers on the number pad to confirm the full-size layout is registering correctly.
- Check battery level: If the keyboard disconnects unexpectedly, charge it and try again. The supplied information does not list a low-battery indicator, so plan to charge proactively during long wireless sessions.
- Keep the receiver accessible: If you move the keyboard between computers, keep the 2.4GHz dongle with the computer you use most, and rely on Bluetooth for the others.
What the supplied information does not confirm
The supplied materials do not list the exact Bluetooth pairing key combination, the number of Bluetooth devices that can be paired at once, charging time, or whether the 200-hour battery figure applies to backlight-off use. They also do not confirm console compatibility or the behavior of the lighting when the driver is not installed. For those details, check the quick-start guide included with the keyboard or the driver's own documentation rather than assuming a default.


